How to pull the axles on a '65 7-1/4" SG ?

Please DO NOT hammer on backside (inner) side of axle flange.
Use a slide hammer bolted to wheel studs.
Or use the "junkyard method " - - Piece of chain (or cable) about 6 to 8 ft long.
One end attached to a wheel stud.
Other end attached to a wheel / tire combination. Place w/t combo near end of axle housing and give a "mighty throw" away from vehicle.
"CAUTION!!! BE AWARE OF FLYING AXLE SHAFT !! -- - - as it (easily) separates itself from the housing.