Looking for 1968 Super Stock brake rotors

-

davescuda

FABO Gold Member
FABO Gold Member
Joined
Apr 30, 2007
Messages
12,060
Reaction score
2,986
Location
Cheshire, CT
Looking for 1968 Super Stock brake rotors complete with hub or the same ones they sold over the parts counter.
Any names or leads would be helpful
thanks dave
 
I don't have any answers just more questions. The SS cars could have a dana 60, but that would have to be BBP. The front disk brakes were surely not SBP, so how did they do it? Were they just B-body K-H disks? What about spindles, and control arms?
All the pictures I have seen look like BBP, front and rear.
 
The rear ends both 8 3/4 & Dana 60 were B-body in size. The front rotors were a special made piece for the cars. They were all disc of course w/4 1/2" bolt circle. I know somewhere along the line the part # was posted, but I've never seen anything of a re-production
 
The rear ends both 8 3/4 & Dana 60 were B-body in size. The front rotors were a special made piece for the cars. They were all disc of course w/4 1/2" bolt circle. I know somewhere along the line the part # was posted, but I've never seen anything of a re-production
The rotors were simply drilled for the 4 1/2" bolt pattern instead of the 4" A body pattern
 
Kelsey Hay made two piece rotors that fit the small bolt spindles and calipers
 
I finally fount a set

0600C41E-0400-4CB3-8627-77B98A5ACBCD.jpeg


64658CAD-E957-4156-AB16-A5092B02CF34.jpeg
 
Congrats, that’s a hard find.

To confirm, is the center register for the rim also large bolt size?

Is the grease cap small bolt size?

Sorta looks like it in pic.
 
-
Back
Top