Anyone have un used project parts

Well after the trade the motor started making noise so he called me. the springs coil bound on the heads and broke springs and rockers. The car came with a 440 ready to go???? We freshened it up at the shop. He had us drop the motor in the car . we ended up with the 500 inch motor.

1969383valiant bought the heads and we freshened them up. The motor was originally tore down to rebuild it. But the owner didn't want to spend the money on the parts. so he opted for rings and bearings in the 440. It sits here as it was when taken apart on a pallet on the shelf above the stove. We are building a larger cube boosted motor so these parts are not needed.

My son is a machinist. so when brought down he will get the specs and look at the parts again. He said when I mentioned it that the pistons were no good for boost and the crank was not the stroke he wants for the HP he wants to make.

If it is what you are looking for what do you want to spend? I am offering these parts because I don't need them and will never use them but they are not eating here and hold the heat from the coal stove for a long while. Its a shame I just drove to Grapevine Texas for a car. 21 hrs one way. drove straight through there and back after a 3 hr lay over.

If theses parts were junk they wouldn't be here. If your looking for new parts still in a box cheap. I am not your man. these are cheap parts to work with but they are not new.

Why should I tell you a Penny when you might offer a Dime LOL. I am sure you know the drill. What would you like to pay.

Give me a call PM me for my info if interested.