1972 Duster Build with my Daughter
Now install the 2/3 clip for behind the upper bearing
slide on the cover to keep the roll pin from every coming out.
The final casting goes on next.
The indicator was dipped in my Coronet Orange earlier in the day so it was installed and aligned.
Now the upper bearing goes in. the original was in perfect condition after cleaning it with Acetone and repacking.
After tapping it in install the snap ring and use to seat it the rest of the way. I use a socket to drive it home.
When the bearing is all the way in the snap ring ends will come together as it falls in the groove.
Install the hazard light
Work the new turn signal harness down the column.
Now install the 2/3 clip for behind the upper bearing
slide on the cover to keep the roll pin from every coming out.
The final casting goes on next.
The indicator was dipped in my Coronet Orange earlier in the day so it was installed and aligned.
Now the upper bearing goes in. the original was in perfect condition after cleaning it with Acetone and repacking.
After tapping it in install the snap ring and use to seat it the rest of the way. I use a socket to drive it home.
When the bearing is all the way in the snap ring ends will come together as it falls in the groove.
Install the hazard light
Work the new turn signal harness down the column.
