408 build

1stgen said
Hi, I’m in the process of building a 408 stroker (360) with the aim of 500hp. The cam I have is from Hughes SEH4652AL-6 which they put together with stroker kit. This is mainly a street car which is a B body and I was after some advice on the intake choice and is there anybody running this cam on the street? Cheers
Click to expand...

What I would do.....

Port match a RPM intake to the heads which should also be ported. Zero deck the pistons and run a gasket thinner than .050. Use a 1-3/4 header tube into a 2-1/2 exhaust pipe at a min.

3.23 gears?!?! Ummmm, no....
3.55’s? Maybe
Use a first class converter.