TTi Slant six exhaust!

-
Mmmmmm...& What Company was that ? Pray may I ask ?? My friend...
& $600 to get them to the States ? Even more intrigued what Company that was , more than once ?
BTW 'Capitol' is the Record Company/Record Label.

$600 they must've quoted the hire of a back run seat on a Lear jet ! Honesty you couldn't pay $600 if you tried )I think they thought they saw you coming) but again, I bet ya I'll get NO facts, just "Opinion" ( raises eyebrow ala JudgeJudy ).
Cheers T
I didn’t follow that 100%, but, click this;
http://www.ttiexhaust.com/
 
I didn’t follow that 100%, but, click this;
http://www.ttiexhaust.com/

{ Yeah, ya Call 'em on it & they FOLD, every time }

360 - I've seen the little detail on the supplied site, thanks, but your quotation you've replied to wasn't directed to you (obviously), unless some have 2 x Handles & forget what they've replied to where (seen that b4)

Here's the Cost posted as Fact, not blurted out - see attach, in AU$...see below, (as stated elsewhere: can't write & attach pics together)
Cheers + your up late !

Screenshot_2019-03-26-08-23-02.png


Screenshot_2019-03-26-08-25-19.png


rps20190226_215714.jpg
 
Last edited:
360 - I've seen the little detail on the supplied site, thanks, but your quotation you've replied to wasn't directed to you (obviously)
Your welcome. I know it wasn’t directed to me but since it is a public post and one I could throw to bits into... I commented. It’s just participating in the thread....
 
Your welcome. I know it wasn’t directed to me but since it is a public post and one I could throw to bits into... I commented. It’s just participating in the thread....
No worries, You'll see the good oil : " Facts, not Opinion..." (As the postee jibed me about earlier...) In soon to Come more Pics.

STILL like to KNOW whom he REPEATEDLY spoke to about prices & wildly OTT shipping ?? On an obvious Sample Set of Non-Slant headers, but...
Putdowns & talk is cheap.
The coming below were built from Hard graft getting up Under a Grand Cherokee (& Wrangler) Funny looking "Pacemakers", of any kind ! & I get accused of BS'ing...Mmmm.
 
UM........................
That ain't a slant header
Yup, sorry for your confusion, but show me where I said :"Slant headers set..." ?? - never did...
Like the prior (Datsun) Sample eg set earlier...
Thanks for interest anyway.
PS , if anyone want's Jeep 4.0 efi l6 headers, they're avail & happily ship most economic rate to USA ( NO Way would You be Staring down barrels of $600 as Someone who's just Gone uncharacteristically SILENT, Claimed Earlier :-/ )..
SAME FOR SLANT /6 which Should be OK for your early A bodies: they are designed to fit '60 & up Valiant (+ nothing a bit of tube & Welder wouldn't fix)
Thanks my friend. Not an advert but anyone can PM me. Thnks

rps20190326_070938.jpg


rps20190326_001037.jpg


rps20190226_215714.jpg
 
Last edited:
I read RRR post as a slight against TTI. Not downunder headers costing $600 + ship.
But I could be wrong. And if that was the way he thinking, I don’t blame him.
 
Screenshot_2019-03-26-20-21-50.png
I read RRR post as a slight against TTI. Not downunder headers costing $600 + ship.
But I could be wrong. And if that was the way he thinking, I don’t blame him.
RRR could've been slight at TTI too, but let that slide, no it was MORE a flaming & direct bollocks reference to my pics posted ( above his post) he refers to here (above).
Don't confuse yourself refactoring $AU cost to $US, (of What he wasn't refering to,at that stage) , from my recent JUST posted quote & Pics of Pacemaker...he Clearly states : "+$600 Ship..." Which is just put down ridiculous; (slow down your reading & work on comprehension & chronological post order more)

ABOVE C & P Quotation RRR isn't referring to EITHER TTI OR MANCINI - AS HE ALSO REFERS TO SWAPING TO LHD FITTING, AFTER VIEWING MY ORANGE/RED HEADERS.

IF someones going to shoot-off at the Mouth, Flaming in multiple directions, Also giving MY headers Another Companies & Cuntries NAME & BS Price etc, then they 1/ Better had damn well done their Homework, at least & 2/ Get their Publically stated FACTS straight :-/ ...

I BET I WILL NEVER FIND OUT THE COMPANY CLAIMED REPEATEDLY SPOKEN TO OR DETAIL: BECAUSE IT NEVER EXISTED AND/OR IS BS FIGUREMENT OF FLAMING GRUFF IMAGINATION.

Called out & folded: you DON'T play bad Poker with a Kiwi.

Enough said.
Sheesh.

WORLDS fastest Indian, Remember ?.

rps20190325_235808.jpg
 
Last edited:
I bought the TTI slant six head pipe. I ain't made outta money so I caint just plunk down for all of it, plus, I am going to route my exhaust differently, so all I need is the head pipe. I will let yall know what it looks like and post pictures when it comes in.
 
What's wrong with the Hooker headers for the slant? Just bought a set last year and had them ceramic coated in ATL. They fit great and sound even better. I got 2.25 pipe all the way back with Dynomax super turbo mufflers.
 
dostroupe- They fit good with what intake. Did you have to modify anything? What year car?
 
RRR- Yea that sounds good. I think you can get the tail pipe cheap from Waldron exhaust. I bet you can get a mandrel bent tail pipe from Pypes for a better flowing system
 
I like the OLD Clifford dual LONG TUBE headers and the MP full length 6 into 3" ...and I always ended up with the drivers side pipe from one of my friends v8 header cars...it either bolted right up..or I added the Y collector to 2 1/2" pipe dumped at the axle.
 
dostroupe- They fit good with what intake. Did you have to modify anything? What year car?

It's a 70 Duster with OEM 2bbl intake. The Hookers come with a plate and a tube that goes from one of the header tubes to the bottom of the intake for heat. I'm running with no choke, it starts and runs just fine.

I went from the original 1bbl, factory exhaust and ignition to 2bbl, headers with dual exhaust and the hei ignition upgrade. Difference is night and day!
 
What's wrong with the Hooker headers for the slant? Just bought a set last year and had them ceramic coated in ATL. They fit great and sound even better. I got 2.25 pipe all the way back with Dynomax super turbo mufflers.

When you get them to fit on an A body from 66 on back, let us all know.
 
RRR- Yea that sounds good. I think you can get the tail pipe cheap from Waldron exhaust. I bet you can get a mandrel bent tail pipe from Pypes for a better flowing system

I am going to exit the "tail pipe" just before the left rear tire and mash it into an oval kinda NASCAR style.
 

Sorry, didn't know we were talking about early A bodies as there wasn't a mention of years. Someone was just wanting headers that fit.

In the link from Mancini, you will see that they offer the exhaust system for both the early and late A bodies. I am actually surprised they included the early cars. Glad but surprised.
 
-
Back
Top