Cam degree

If you’re sure tdc on the wheel is really tdc....... and you’re comfortable you did the lobe measurements correctly...... it is what it is.
That’s why you buy the 9 keyway timing set...... so it's easy to move the cam.

FWIW, I use the dial indicator to determine tdc as well.
Usually .200 or .300 from tdc, equal degrees on either side of the pointer.

I’d have double checked everything once after I came up with those results the first time.
If it repeated...... I’d have called it good and buttoned it up.

I really couldn’t care less what dot lines up with the other dot....... as long as I know where the cam is(and it’s where it should be)...... that’s all I care about.