Holley Hyperspark

-
KJoeZ61

KJoeZ61

Well-Known Member
Joined
Apr 4, 2017
Messages
422
Reaction score
147
Location
Northampton Pennsylvania
Does anyone know where I can get these connectors? They are for a Holley Hyperspark coil connector. And no Holley / MSD doesn't sell them!

IMG_0861.jpg


IMG_0862.jpg


IMG_0863.jpg
 
Here’s a discussion. Appears to be used on ford and gm coils. I’m sure it’s some kind of metri pack but don’t know what series. The Sniper connectors use a metric pack 150.

HyperSpark Ignition Connectors

I couldn’t come up with connectors.

May call efi system pros and talk to Chris. He has helped me on some things.

Sniper Components
And browse here
Terminals & Pins
That’s all I can come up with. Good luck.
 
Last edited:
Last night I was all over the Holley forum and even asked, but nothing. And the crazy part is if you ask about cutting the wire you don't get pleasant answers. Danny the administrator also guided me to the same page you did and they suggest you grind down the terminal and solder it. How can that be better than shortening the wire and either soldering it or using a good crimp connector?
 
Dubob said:
Here’s a discussion. Appears to be used on ford and gm coils. I’m sure it’s some kind of metri pack but don’t know what series. The Sniper connectors use a metric pack 150.

HyperSpark Ignition Connectors

I couldn’t come up with connectors.

May call efi system pros and talk to Chris. He has helped me on some things.

Sniper Components
And browse here
Terminals & Pins
That’s all I can come up with. Good luck.
Click to expand...




Someone makes it. I think there is a company called M and H electric. Google them. They may be able to help you.
 
I'm in need of those connector ends too. They are also used in the Ford TFI coil pig tail connector that you can purchase, but like you, I would like to make my own harness.
 
I assume your doing the Hyperspark as well? I am putting the CD box and the coil basically next to each other on the drivers side inner fender.
 
KJoeZ61 said:
I assume your doing the Hyperspark as well? I am putting the CD box and the coil basically next to each other on the drivers side inner fender.
Click to expand...

I wasn't, but I was looking at that Hyperspark distributor and CDI setup when I was looking at a Sniper EFI "electronic carburetor". Honestly, I just wanted to build my own coil harness using a Ford coil and I wanted those connectors to make everything clean looking.
 
You must log in or register to reply here.
-

Back
Top