65 Dart Revisited II

65ChargerDart said

Thanks for the vinyl top tutorial. I'll be referring to it for my vinyl top installation. Did you use a metal strip to secure the vinyl above the window opening? Did you fill the void between the vinyl and stainless trim that fits over the gutter with sealant?

Click to expand...

Hello 65. Regarding the metal strip. I placed the front stainless roof trim prior to the vinyl installation marking a line which would be the leading edge of the trim...then I installed the vinyl to that line. I installed the clips over the vinyl, and I attached the stainless over the vinyl and clips. Be sure to use a marine grade or auto vinyl contact as I do not know if a standard Formica or Weldwood brand interior adhesive will hold up to the outside elements. Regarding sealing the gutter under near the roof rail, I sealed this area prior to painting, and I ran a bead over the vinyl at the joint of the pinch at the gutter. Careful with some of the seam sealer as I noticed some crazing of the paint after application. Thanks. Jerry