70 Dart Triple Treat Build

Finally had time to work on the car again: had to order larger wheel spacers (which weren't the correct center bore diameter initially) to accommodate the 17x8s due to the backspacing vs tie rod clearance issues, the tie rod end was hitting the rim so that wasn't any good. Finally have the steering installed and roughed out, need to take track width measurements vs the rear end to see what the difference is. Rebuilt the steering coupler on the column, that was a pain and readjusted the mount distance of the column to the firewall so that it actually lines up with the 3 mount points inside the car under the dash. Tonight is interior tear down night, everything that needs to come out for the roll cage is coming out.