70 Dart Triple Treat Build
Ended up working on the dash at a friends house the other night and it turned out alot better than I expected. Gauge holes need to be cutout and finally can start the wiring. I already modified the factory wire harness; removed all unused circuits and the junk factory fuse block That took a long night of pure headache, 2 wire diagrams and a Haynes manual to get it right. I have a marine grade fuse block that's going to replace the factory one. Also haven't decided if I'm going to remove more of the dash (without compromising structure) to lighten it up a bit more or just go with what's been cut out at this point. Passenger seat came in with brackets and sheet aluminum ordered for the fuel cell enclosure.
Ended up working on the dash at a friends house the other night and it turned out alot better than I expected. Gauge holes need to be cutout and finally can start the wiring. I already modified the factory wire harness; removed all unused circuits and the junk factory fuse block That took a long night of pure headache, 2 wire diagrams and a Haynes manual to get it right. I have a marine grade fuse block that's going to replace the factory one. Also haven't decided if I'm going to remove more of the dash (without compromising structure) to lighten it up a bit more or just go with what's been cut out at this point. Passenger seat came in with brackets and sheet aluminum ordered for the fuel cell enclosure.
