Torsion bar trouble
Free time at work, some scrap steel, 3/4 angle iron and u bolts and I made a T bar puller that worked well for me. Also, ya have to make sure you don't bind the T bar by how the front end is supported. One side would not budge until I put an extra jack under the front with a slight lift.. and POP out she slid.
Free time at work, some scrap steel, 3/4 angle iron and u bolts and I made a T bar puller that worked well for me. Also, ya have to make sure you don't bind the T bar by how the front end is supported. One side would not budge until I put an extra jack under the front with a slight lift.. and POP out she slid.
