Rear Window Regulator - Video

-
Those regulator assemblies are soooo much fun.:D
I took both side out and went through them completely.
Getting them back in correctly was a bit of a challenge.
 
Ya Looks so simple! Throw in fresh paint and try it! Between 13:35 and 13:40 of the video, he hits the top edge at least 4 times!! That's 4 visible paint chips and I couldn't see the door jamb area. I highly recommend taping up everything before starting if your car is already painted as for sure you are going to hit the top edge where your new paint is. As well, I got a trick from an old MOPAR body man. He suggested marking around all the bolts before removing them. Then just align the bolts with the marks you made when putting everything back together so the regulator aligns properly.
One of the members on here suggested that this be done if the outer quarter panel is removed. Definitely the best time to do it.
I still think that this is one ***** of a job!!
 
Sedans are totally different and so much easier to swap and adjust.
 
-
Back
Top