[WANTED] Barracuda steering wheel emblem

-
Status
Not open for further replies.
Mike69cuda

Mike69cuda

Mopar Moron
FABO Gold Member
Joined
Jan 2, 2018
Messages
3,479
Reaction score
3,269
Location
Kansas City
Rating - 100%
5   0   0
Contact seller
Would like to buy emblem to replace the one in my 69 Cuda steering wheel. It has a Plymouth one now, would like barracuda one shown. They are very expensive on the web ($60+). Would like nice driver quality.

6A59B0E7-D79E-4F61-86BF-FD85CEF8FC84.jpeg


587E5282-680A-4FC8-BAA3-F072DCC64969.jpeg
 
I will trade even for a Dart one. However I don’t know how to get the emblem out of the horn pad. Does it pop out the front with a screw driver or somethin’

F09CF580-162E-4953-B049-91B2A5CFC7FD.jpeg


2F9A4ABE-789F-4CBB-A9A7-01CB838D7C2D.jpeg
 
meathead66 said:
I will trade even for a Dart one. However I don’t know how to get the emblem out of the horn pad. Does it pop out the front with a screw driver or somethin’

View attachment 1715317956

View attachment 1715317957
Click to expand...
The single locking tab is in the 3:00 position. So I think it is best to pry the emblem to the right at the 9:00 position to remove it with the least amount of damage. Also tape the end of the screw driver or better yet, use one of those plastic trim removal tools that are sold at Harbor Freight to do the prying with.
 
694spd said:
The single locking tab is in the 3:00 position. So I think it is best to pry the emblem to the right at the 9:00 position to remove it with the least amount of damage. Also tape the end of the screw driver or better yet, use one of those plastic trim removal tools that are sold at Harbor Freight to do the prying with.
Click to expand...

Will do that if and when I get a correct emblem. I don’t even know what one for a Dart looks like. Thanks
 
meathead66 said:
I will trade even for a Dart one. However I don’t know how to get the emblem out of the horn pad. Does it pop out the front with a screw driver or somethin’
Click to expand...

I will look around for a Dart one to trade. I have never removed one, but I have been told that if you soak it in warm soapy water the plastic will soften up some. Thanks!
 
Status
Not open for further replies.
-

Back
Top