72 Swinger owners, need some help
Let me see if I can help you out, I went out and took a few pictures lets start with the bracket from the rad support to the K-frame,
These are the original fasteners that hold this bracket on, this one is a bolt with a round head on it that if I remember correctly goes thru a square hole on the rad support. Like a stove bolt it has a square neck on it that prevents it from turning in the square hole.
The bolt at the K-frame is a self taping type bolt, you can slightly see the thread cutting edge running the length of the bolt,
My bracket is slightly longer then 10 inches and the bolt centre to bolt centre distance is 7 3/4 inches,
On the bracket that holds the grille tab i have two pictures one from below and front the other from inside the wheel well,
Hope that helps you out with your project,
Danny
Let me see if I can help you out, I went out and took a few pictures lets start with the bracket from the rad support to the K-frame,
These are the original fasteners that hold this bracket on, this one is a bolt with a round head on it that if I remember correctly goes thru a square hole on the rad support. Like a stove bolt it has a square neck on it that prevents it from turning in the square hole.
The bolt at the K-frame is a self taping type bolt, you can slightly see the thread cutting edge running the length of the bolt,
My bracket is slightly longer then 10 inches and the bolt centre to bolt centre distance is 7 3/4 inches,
On the bracket that holds the grille tab i have two pictures one from below and front the other from inside the wheel well,
Hope that helps you out with your project,
Danny
