EFI In Tank Pump Baloney

I think that is the exact issue, the rubber hose turns soft, it doesn't survive.

I'm going to see if the local parts store has the nylon hose or ptfe and clamps, just so I can fix it and be done this weekend.
If not, I'll order it online, and wait.

The guy mentioned the nylon hose, and that it needed to be heated to get it on the fuel pump side, but said it had a threaded end to screw into the housing.
That wasn't really making sense to me at the time.

It appears the solution they sent included the wrong teflon tape, the wrong fitting, the wrong hose, and a 1 sweet clamp - but I need 2!

Fail.

I was right about the baloney, seems like a triple decker sandwich at this point.