[Found!] U-joint strap

-
Status
Not open for further replies.
Tracy, I think I have one for 'ya. It's tough to measure exactly...

upload_2019-4-11_10-32-45.jpeg
 
USA STANDARD GEAR USA41195 U-joint Strap Kit; Includes two straps and four bolts Info
Heart.png

Rear; RWD; Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25"; 1310 and 1330 u-joint size
Just look under 1970 chrysler new yorker
 
A tip from my days in the shop. As long as the holes are round then center to center is the same as the beginning of one hole to the beginning of the other hole, way easier to measure from the edge of a hole to the edge of the second hole than try to guess where the centers are.
upload_2019-4-12_9-52-24.png
 
winky said:
A tip from my days in the shop. As long as the holes are round then center to center is the same as the beginning of one hole to the beginning of the other hole, way easier to measure from the edge of a hole to the edge of the second hole than try to guess where the centers are.
View attachment 1715318504
Click to expand...
That's how I always measure them. You can easily be .020-.030" off trying to eyeball it. Thanks for sharing
 
mod5v said:
USA STANDARD GEAR USA41195 U-joint Strap Kit; Includes two straps and four bolts Info View attachment 1715318385
Rear; RWD; Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25"; 1310 and 1330 u-joint size
Just look under 1970 chrysler new yorker
Click to expand...
Thanks Mod. I thought this yoke came off a 68 and looked there but they only showed 7260 and 7290. I didn't realize they used that same size u-joint cap on so many. I think I have a good used one located but if it doesn't work I'll order those. Already put them in the cart for safe keeping
 
Hey Tracy, I just went out and measured the ones I have and they are 1.4875 MOL? I have a ton of them. PM me your address and I'll mail you a pair.
 
Status
Not open for further replies.
-

Back
Top