[Found!] Factory Disc Brake Parts to convert from Drum

-
Status
Not open for further replies.
arrow360

arrow360

Active Member
Joined
Oct 15, 2011
Messages
44
Reaction score
2
Location
Maryland
Rating - 0%
0   0   0
Contact seller
I have (2) A-bodies that I want to convert from their original drum fronts to '73-'76 Disc Brake setup.

The parts that I will need to replace are the upper a-arm, and spindles. I think the lower control arm is interchangeable between the two arrangements. The calipers & rotors are no big deal, but if you have them too, I may buy the whole lot.

Let me know what you have.

Thanks,
Jay
 
Jay, you'll also need the brackets that attach to the spindles and hold the calipers, and lower ball joints with larger bolt holes to match the larger holes in the disc brake spindles. Also, the larger bolts themselves.
I have a set of brackets and attaching bolts for the 10.98" rotors and slider type calipers available for $40 shipped to the U.S.
 
I have everything off my Duster I won't be using i took it off one piece everything together a-arm to lower ball joint. There is new 72 Roadrunner brake hoses to move the calipers to the rear need to use on early cars if your using a stabilizer from 72 and back. I live in Danielsville Pa. but travel to Maryland to my daughters. PM. me if interested.

7.jpg


8.jpg


14.jpg
 
arrow360 said:
I have (2) A-bodies that I want to convert from their original drum fronts to '73-'76 Disc Brake setup.

The parts that I will need to replace are the upper a-arm, and spindles. I think the lower control arm is interchangeable between the two arrangements. The calipers & rotors are no big deal, but if you have them too, I may buy the whole lot.

Let me know what you have.

Thanks,
Jay
Click to expand...
If my car doesn't sell by next Saturday I'm gonna part it out I have a disc brake set up big bolt on a 74 duster
 
Not a complete set, but I’m going to list this stuff. It’s the drivers side spindle, caliper bracket, dust shield, pad retainers, all the bolts and fasteners, and the rotor and caliper, which are not pictured. $50 if you want it!

0FE25426-F612-48BD-B6C0-CCA84AA0C83A.jpeg
 
Status
Not open for further replies.
-

Back
Top