torque specs for wheels

found this old thread as Broke a Moser Screw in Stud. Moser said the stud {#8} goes in at 55#'s because it has a lock washed behind it.
But to put the Lug Nuts on the steel wheels at #85.
I installed them same as the fronts, at #65.
Reason I had to change one was on the the 1/2" 20 nuts was cross threaded.
Back when i had the front rears off at a buddies shop. I put the fronts on. took a bathroom brake and came back and the rears were on with an inpact.
My biggest Braker Bar with a pipe is what it took to get that "Lug Nut" off! {ie} Brake the Screw In Stud.
I have a set of 15x8 Ram "Charger Wheels" that take Dog Dish Caps off a 1978 or so Ram Charger that had damage to the wholes. My son worhed a a Wheel repair place that mostly does New Aloys. But was able to fix them.
They guy across from me has a Harbor Frieght Impact. He has it turned all the way up. Says that they should go on so they do not come off. That you have the gun when they do.
I never asked hom what happenes when he gets a flat.