Ok guys need your help!

Simple. "100 years?" You mean yards? First, is there an engine / trans in the car? If not, install the crossmember, remove enough hardware in the grill to get a timber through there, and stuff a timber in through the grill clear back past the crossmember. Buy a big 4x4, etc, from a lumber outfit, 10/ 12 ft? You want the timber above the crossmember, and in the tunnel

"Rig" a bolt, etc whatever through the timber and lash/ chain the timber to the crossmember. This will "pull" and "push"

Now, just lash the timber to the K member with a chain/ binder/ come-along etc with appropriate blocking. "Rig" a hitch / ring etc to the pickup end and off you go.

If you need more car front ground clearance, jack it up and rig the timber UNDER the K member