833 4 Speed parts

Need a good ball detent side cover. 66 and newer.
And a 1-2 shifter fork.

As usual, I collect parts over a period of time at swap meets or FABO to "improve" my old iron. So I finally obtained a 64-65 Floor Hump recently which was the last major item needed to convert the 3-on-the-tree in my 64 /6 Valiant to a 4 speed.

My swap meet 3.09 tranny is so early, it has the short fork which was soon changed to the longer semi-circle version which is the one I want. The short one was a bad idea from the get go.
The side cover I have has a cracked shifter shaft bore which was also soon beefed up by Mother Mopar as a running change.


I took it to the Clay City /6 drag race last September and every run got worse than the one before and it was getting very difficult to shift at all. I barely made the 5 hour trip home in a driving rain.

The tranny I drove to PA to pick up a couple years ago supposedly came out if a 65 Barracuda complete with a Hurst Competition Plus shifter and I'm just starting the rebuild.

I'll give this about 3 days but if nothing turns up I'll just get these parts from Passon.