Dartfreak75... Quick TQ tuning tips Video I made for you

Tune tech tip;

Given the difficulty of tuning parts, picking up several junk broken carbs can yield different rods and jets. While a bit pricey for just the acquisition of these parts, spare bodies come in handy.

Try the carb shop or other carb rebuilders sites for parts.

Now IF you have an AFB/AVS tuning kit (or you can get on cheap) bend the AFB/AVS Rods 3/4 down from the top and clip off. There a thicker rod and may/will require you to drill out the TQ’s tree that holds the rods. (I’ll double check that since it has been awhile.)
But this opens up the tunability of the carb. Just realize there a two step rod, not a 3 step rod.

It is also possible to use the AFB/AVS step up springs. But they are MUCH smaller than the TQ spring. Take note when you use them. Also remember the TQ has a cam inside of it to manually open up the enrichment circuit if the spring fails to do so.