Hood alignment woes stripped bolt in hood

Thank you everyone I Heli-coiled the hole today. I still have no clue how the heck I overtightened it enough to strip the threads inside the hood. Oh well done and over with. Luckilly I had a heli-coil in my tool box and tap for 3/8-16 hole mentioned above, left over from fixing a mustang cylinder head. Just had to run out and get a 21/64th drill bit.

I really didn't want to adjust the fender because everything else looked perfect. I installed this 340 hood before paint and never had it aligned before paint. Next time ill do that so its right and can be marked before removal like mentioned above. After reading a couple other threads where guys had my same issue I decided to slightly elongate the hole back hole on the bottom of the hinge. I may have opened it up 1/16" or so. It didn't take much at all and allowed the hood to now sit flush. After a few hours of that today, adjusting hood pins, latch, and front hood bumpers it sits almost perfect. Im stopping now before I make it worse lol. Im sure besides myself only person to notice its not exactly perfect is a body guy.