Alignment

Not to hijack but I have a 5906 on my Duster with the shock mounts. I also have aftermarket strut rods (Reilly). I was just messing with the end links last night. Photo #5 in their instructions shows the link pretty vertical but in reality, I don't think there's a way to get it there. Because of the bar width and shock mount location, the links will always lean in. Rotating the shock mount brackets will affect that to some degree.

On mine, the links would have to be quite a bit longer for the bar to be level with ground.

With the bar centered, a lower link washer is close to each strut rod - 3/16-1/4" clearance maybe. If the links were longer there would be plenty of clearance there.