383 motor mounts, Form S

-
Are you still interested in the gears. I think he was going to buy 3.55s from richmond gear on amazon. Will have the 3.91s left over.
 
Might be ! Like i said i just installed a NOS set in the rear. But an extra set could come in handy
 
Will be over in a few weeks. Got some interior parts from My 73 Duster build, if they fit they are yours. Arm rest pads, kick panels, knickty knacks. Send me a list and I will cram in what I can.
 
Bought new fish for sons 69. Holes were there but no emblems though. I got new 69 fish . Holes didnt line up. Were punched for 340-S, so i returned em. Wasnt sure what was supposed to go there, but am in process of making a 340 clone.

Rick at Laysons said i would be better off doing an exchange for the repop 67s so i dont have to pay a 20% restocking fee. So i will now have new 67 fishes i was gonna buy anyways. Now would be willing to part with the other pair. I figured i would give you first crack If interested before i put em up for sale. PM me, i will send pix, and we can get the ball rolling. Laysons 69 emblems did not come with sheetmetal nuts, not sure if 67s are the same way. If they are, i will need to keep the trim nuts from the fish for the new ones.
 
Found some A-body BB conversion mounts on Portland C-List. Take a look and see if they will work for you.
Very kool but they are not the style I needed. Many thanks
Bought a new set from Schumacher like in this pict. Mahalo see u in couple weeks, C

383-A Mount3.jpg
 
Wish i could get the bb k frame. Oh well
 
Ha ha, so many parts up there. Not so many here.
 
If you're going the stock route, here's a few pics I've saved over the years...

View attachment 1715324954

View attachment 1715324955

View attachment 1715324956

View attachment 1715324957

I was looking for some confirmation on my engine placement after installation. I have a 318 K member and just installed my 383 and A833 transmission for the first time after building. Based on where the engine block tab is sitting on your pic... it appears that mine is sitting in nearly exactly the same spot in relation to the power steering box. So I think Mine is sitting about where it should be in the engine bay. Thanks for the pics.

9C4E05A4-5CD4-449D-AD73-3CDF82EE23F0.jpeg
 
Got mine !!!
Anyone tell me what proper engine color for 68 / 383 ? Is it blue or red ? I have heard both. I need to be sure . Many Thanks, C

20190502_060302.jpg


20190502_060254.jpg
 
'67 and '68 are turquoise, am not sure of '69. Your motor is looking good, don't forget dip stick tube attaches to rear motor mount bolt. I choose to install tube after engine install and manifolds are installed. These motors use no splash shield at the starter.
 
'67 and '68 are turquoise, am not sure of '69. Your motor is looking good, don't forget dip stick tube attaches to rear motor mount bolt. I choose to install tube after engine install and manifolds are installed. These motors use no splash shield at the starter.

69 is Street Hemi Orange. All years in Chrome cover.
 
-
Back
Top