[FOR SALE] 16 Chrome Moly 3/8" 3.340 Pushrods

-
Status
Not open for further replies.
blewbyoutobad

blewbyoutobad

FABO Gold Member
FABO Gold Member
Joined
May 23, 2010
Messages
1,417
Reaction score
463
Location
Missouri City, TX
Rating - 100%
18   0   0
Contact seller
One set (16) small block hardened pushrods 3.340 length (from end of ball to inside bottom of cup). Should be standard for hydraulic cams, check your application. I also have a post for 21) 273 adjustable rockers with hold downs and spacers
$70 Houston, TX plus frt.
Thanks FABO

KIMG2255.JPG


KIMG2257.JPG


KIMG2256.JPG
 
Yes they are 7.5 end to end. Subtract half the ball diameter and you come up with 7.340 for the effective length.
 
Last edited:
Yes sir, see this add from Summitt for standard length on hydraulic cam. Proform Pushrods 66417C A 273 solid lifter uses a shorter pushrod as the contact point with the cup sits higher in the lifter than the hydraulic. I used a Lunati solid cam in my current set up and bought Smith Bros custom length.
 
Last edited:
Status
Not open for further replies.
-

Back
Top