Pedal rod to Z bar question.

Well guys I found the culprit. The pivot bracket was bent back enough to mis-align the bearing on the PP fingers. I didn't notice it with the BB style PP but after installing the diaphragm plate I could see I was off about an 1/8" or so. I removed the pivot bracket and put in the vice and (yes caveman style) bent the bracket back twice to get it perfectly centered on the PP fingers. Pulled out the pedal spring but had to add a light spring down by the adjustment rod spring to give me my bearing free play. All working good now on jack stands. Will test after I button up a few non related items on car. Wish I had time to order a fork and bracket but all is good.