[WANTED] Hood Pins

-
Status
Not open for further replies.

Mopar7X11

Member
Joined
Mar 21, 2019
Messages
5
Reaction score
0
Location
Arkansas
Rating - 100%
1   0   0
Contact seller
Anyone have any hood pins for sale or what is everyone using?

I have the old torsion style that flip over. One broke and I bought some from Mr. Gasket and they broke immediately after flipping over 1 time.

Ideas?
 
I use the Mopar restoration parts ones that are sold by several vendors, they are factory duplicate's and licensed by Mopar.

IMG_20190506_141329.jpg
 
I use the Mopar restoration parts ones that are sold by several vendors, they are factory duplicate's and licensed by Mopar.

View attachment 1715331346

I use this same kit bu the clips are wrong. They should be stand up as in this second picture and they are not. You need to buy both these kits to have the correct clips.
s-l300.jpg


shopping


DSCN2526.JPG
 
Last edited:
I use the Mopar restoration parts ones that are sold by several vendors, they are factory duplicate's and licensed by Mopar.

View attachment 1715331346

The only duster that came with hood pins was 71

That Mopar kit comes with the wrong lanyards ends and length, the wrong lower nuts for a Duster and the later style clips.

The OEM lower nuts have a holder built on that extends through the access hole in the fender on 71 Dusters

1060552-e9dc532fe5fcacf08fe2a2c7fb50997b.jpg


They usually face front this guy tucked it in.

1060551-dc256d600e98be0312b0badcb18d2bf9.jpg
 
The only duster that came with hood pins was 71

That Mopar kit comes with the wrong lanyards ends and length, the wrong lower nuts for a Duster and the later style clips.

The OEM lower nuts have a holder built on that extends through the access hole in the fender on 71 Dusters

View attachment 1715332185

They usually face front this guy tucked it in.

View attachment 1715332186
I got the 18 inch lanyard kit for 71 Demon, my car has factory screw holes for the lanyard to bolt to.

IMG_20190101_195213.JPG
 
The only duster that came with hood pins was 71

That Mopar kit comes with the wrong lanyards ends and length, the wrong lower nuts for a Duster and the later style clips.

The OEM lower nuts have a holder built on that extends through the access hole in the fender on 71 Dusters

View attachment 1715332185

They usually face front this guy tucked it in.

View attachment 1715332186
Good info for the Duster's, I never knew how they mounted from the factory. Thanks!
 
Status
Not open for further replies.
-
Back
Top