440 Clutch Recommendation.

I have read and heard a lot of good things about advanced clutch technology, if you call their tech line they will build a clutch to spec out to your build. Definitely worth a look. One drag racer trick in the past was to run the smaller 10-1/2 inch disc on an 11 inch (Or Larger!) flywheel to add inertia to the launch but use a 10-1/2 inch or smaller clutch disc with a crap ton of spring pressure to reduce inertia on the synchros. This is definitely a combination that would be better served by the close ratio heavy duty NP 445 four speed truck transmission, but if your not going to be power shifting it and do a good job scuffing a cross hatch on the synchro brass and gear cones with some 400 grit, it should handle an 11inch clutch with ease, just like the Hemi A 833.