K Frame question

-
zigs

zigs

Well-Known Member
Joined
Apr 10, 2010
Messages
2,684
Reaction score
799
Location
Yakima, Washington
I have a chance to pick up a /6 k frame with 318 motor mount conversion for cheap and close.
will the 318 mounts fit a 360 also or is there a difference between 318 , 340 /360.
I already have /6 frame in car
 
less there is something wrong with your slant6 K frame, this would be the long approach. simply buy (the correct) conversion mounts and install them on you existing k frame.
why the swap?
 
how cheap?
conv mounts are what, 150 ish?
unless you already have your K out...
 
He wants $50. For K member with 318 conversion. My question was , will it fit a 340/360. My thoughts were no but I thought I would ask. . No engine in car so k frame is not that hard. May just look for V8 frame ,
 
Last edited:
What I remember is you just need to washer / shim one or two of the bolts at the engine on the driver side. Some of those mounts, the ears will bend and you can just bolt it on and "suck it in"
 
You must log in or register to reply here.
-

Back
Top