Dartfreak75... Quick TQ tuning tips Video I made for you

Bushing the Thermoquad is really very easy. It takes a reamer that I found only in one place and brass tubing from the Hardware store. If anyone is interested I can list everything needed and where to get it. I've done a couple that the green Teflon is wore off of the shaft, most of the wear is in the baseplate, so when done they have still been very acceptable for use.
I watched a couple videos on Youtube, one a Quadrajet and the other an AVS or AFB variant. The Quadrajet has a much thicker baseplate than the TQ. On the Q-Jet the bushings they use and sell are much thicker than are acceptable to use on the Thermoquad, hence the thinwall brass tubing that I use on mine. Also the stainless steel throttle blade screws needed and where to get them.
I've collected quite an assortment of Thermoquads also, several NOS ones, quite a few of the electric choke models also. I take the throttle shaft out of the newer junk smogger models and put them in the Chevy models.
I'm not much of a carb tuner, but have a good friend that's very good at it. Again-very easy to rebush the TQ!