HELP ..Runs dies No start .. then start
KEY ON ..using this diagram, what I have is ECU #1 to left BR 11.2 V..
#2 - coil 10.45 V..
#4 and 5 ECU to dist.
....
3 wires - coil one to choke, other two to BR right side ..
only have single ballast resister
..both sides of coil at 10.30 V ..
also 11.2 V and 10.8 V at BR.. ONLY 4 wires at ECU ..
if this makes any sense ..
#2 - coil 10.45 V..
#4 and 5 ECU to dist.
....
3 wires - coil one to choke, other two to BR right side ..
only have single ballast resister
..both sides of coil at 10.30 V ..
also 11.2 V and 10.8 V at BR.. ONLY 4 wires at ECU ..
if this makes any sense ..
