Stop in for a cup of coffee

toolmanmike said
I like the numbers on the lower side of spec. 28-32° Dwell is the time the points stay closed. If the adjustment is 30 or just below the4 numbers will go up slightly as the rubbing block wears. Speaking of that, @halifaxhops , what do you use for point lube? I may still have a few of those little capsules that came with points.
Click to expand...
Shooting for 30, then set the timing. Not sure how many miles ago the engine was rebuilt (probably less than 2k), what cam they used (said it was hotter than what it came with), or if the timing change was replaced. Going to start at 10 btdc and drive it and adjust a couple degrees until it runs smooth.