For mileage and torque, I woulda gone with a 112 or 114 LSA. But that is 'water under the bridge' now. Degree the cam for sure.... you specs listing does not say if the cam has any ground-in advance or not.... OK, just looked it up: ICL is 108 so only 2 degrees of ground-in advance. Yes, I'd want to put it in at around 104-ish, if you are emphasizing torque/mileage.
Pretty slow ramp cam for a roller... 57 degrees of difference between the advertised and .050" lift duration numbers (203 vs 260). Does not take advantage of the roller.. but it will last forever! The regrind cams profiles there are slow ramps...that may just be the nature of the re-grinds.
Hydraulic Roller Camshaft Specifications
