Torque converter crack

I've never seen one that bad and not broken completely off. If you stick your finger down inside the converter, you'll see that the wall becomes a lot thinner further down. That's what causes them to crack. Lots of times tho, the converter can be a mess and the bushing unhurt. I had a guy install one and left it a gallon low while tuning and it ate 1/16" off the converter all the way around and didn't touch the bushing. At least look in there and see if both tangs are still present. But, I'd drop
out the front drums to check the clutches. Some old used ones are better than burnt ones.