Scoots340
Member
Noob question but what heater boxes fit a 70 duster non AC car? The vent door broke off mine and there are several broken pieces.
Heater box
- Thread starter Scoots340
- Start date
-
Welcome.
I would say just about any A-body 1967 or newer.
The "hinge" on the vent door tends to rust up and next thing you know, snap goes the plastic housing. I have fixed them though.
Post a picture. If it's too far gone, you can find a used one here.
You can rebuild them with parts from vendors like DMT.
I would say just about any A-body 1967 or newer.
The "hinge" on the vent door tends to rust up and next thing you know, snap goes the plastic housing. I have fixed them though.
Post a picture. If it's too far gone, you can find a used one here.
You can rebuild them with parts from vendors like DMT.
Ronald C.
Well-Known Member
If you have a picture to share, I may have an extra box I would let go cheaper than you can buy parts. But not positive I have what you hunting for.....
Scoots340
Member
This is what I have now trying to fiberglass in the holes the re enforce it with some metal. I have the DMT kit for it.
Ronald C.
Well-Known Member
I don’t if what I have will work for you. I’ll take a look and see. Mine would be out of a 72-73 Dart, maybe even a 74 but just have to look
Wilson340
Well-Known Member
I have this clean complete set up from my 73' Duster that should work if you are interested. As far as I know this should fit a 70' as well unless someone knows something I don't.
-
