Where did the factory ground these wires at? 67 Barracuda

-
B

bmoparmofo

Well-Known Member
Joined
Aug 19, 2010
Messages
88
Reaction score
15
Location
Michigan
Replacing the wiring harness in the 67 Barracuda just wondering where the factory had these wires grounded at?
20190606_204034.jpg
 
I think they go through that hole and use the radiator mounting bolt or a lug next to it. Thats the way the later ones were but it was on the driver side.
 
Yep, 67 Barracuda headlights should be both grounded with 1 screw on drivers side. The park/turn fixtures were chassis grounded through metal grilles so no more actual wires for grounds were req'd. The later models had plastic park/turn fixtures and grilles so additional ground wires were required.
Regardless of why you have ground wires on right side, you may need to add a screw.
 
RedFish said:
Yep, 67 Barracuda headlights should be both grounded with 1 screw on drivers side. The park/turn fixtures were chassis grounded through metal grilles so no more actual wires for grounds were req'd. The later models had plastic park/turn fixtures and grilles so additional ground wires were required.
Regardless of why you have ground wires on right side, you may need to add a screw.
Click to expand...
thanks for the help everyone just wanted to make sure the new harness only has it on the passenger side.. I ended up just putting a self Tapper up into the core support in that spot. Thanks once again
 
You must log in or register to reply here.
-

Back
Top