6.1 Hemi into 72 Demon March 2018

So here are some pix of the finished rotors, keep in mind there is a place for heavy rattle tools and this is not it. I took the pix showing topside and bottom side of the hub. You have hard steel bolts in Alum threads. If you are heavy handed screwing them in you are a done duck as they cross thread easy and the rattle gun will just drive em home. I always hand start bolts when going into aluminum with steel. I also use a bit of Locktite on front end stuff. Some folks do not, matter of opinion I reckon. And ensure you follow the torque specs on rotors etc. not a place to wing it!