67 Barracuda any idea on location for this bracket?

-

bmoparmofo

Well-Known Member
Joined
Aug 19, 2010
Messages
88
Reaction score
15
Location
Michigan
Hi somebody else dismantled this car and I'm putting it back together there's this bracket labeled Front Bottom but not sure where it actually goes? Also putting the front valance on there are two holes back towards the K member that I'm sure would Mount to something but there's nothing there to mount it to? Let me know if you have any ideas thanks I appreciate it.

15600264254361797619595243535279.jpg


15600264454342806846699825884896.jpg
 
On a 67 dart that looks like the brkt that runs center front under bumper area to center of the front of the K member, there are rod type brkt that goes from fender to body
 
Bumper brackets/stabilizer? On the bumper ends? Need a wider pic, or at least I do lol
 
Last edited:
that looks like the lower core support. if so, they're just drain holes
 
The 2 tabs on the valance should have U nuts or clip nuts on them, and attach to the sides of the lower radiator support. Should be holes in the support for this. Bolts go in from the support on the radiator side into the clip nuts on the valance
 
Red circle to K-Frame and blue to lower core support! In your pic as viewed from underneath. The ribs should point towards the road.

43EDB899-A151-4994-8F8D-A85F3D4D86E9.jpeg
 
I could use the bolt that attaches to the k member. Or at least a photo of an OE bolt And nut
 
Not sure if this will help but just jumped under for these pics. Keep in mind the front license bracket in the first pic hides some of what you may want to see.

They are through bolts with what I call captured nuts. Or flange nuts.

3D9309D5-1DB0-4F60-BE23-5C3EBBEC31CB.jpeg


215E6637-7C2D-4B06-8B2B-16511193D290.jpeg
 
Last edited:
Not sure if this will help but just jumped under for these pics. Keep in mind the front license bracket in the first pic hides some of what you may want to see.

They are through bolts with what I call captured nuts. Or flange nuts.

View attachment 1715346853

View attachment 1715346854
Thanks for the info and the pictures as well! I put the bracket on from the core support to the K frame glad you had the picture of the front license plate bracket as I had not installed that yet but will need to. I'll have to double check to see if there's a bolt hole on the driver side on the core support. Maybe I just missed seeing it I did see one from the passenger side. I'll be crawling back under there again tomorrow! Thanks once again everyone I appreciate it!
 
Matt,

The more I look at it you may be correct. There are many examples out there that I followed. We all know when it sits so long you forget and or the pics at disassembly were incorrect due to a previous owner!

It makes sense that the wider end would be at front to help support the LP bracket. Easy fix though!
 
Last edited:
On my 67 i built a lower rad support out of 2x3 boxed steel. I never bothered with the stiffener after that lol. Could never find one that wasnt bashed in either. This thing is strong enough to stand my overweight *** on it.

20160903_210837.jpeg
 
-
Back
Top