Had headlights, then high beam only, now nothing

Well, I finally solved my headlight & wiring issue. And it seems that I actually created the problem myself, much as I hate to admit it. Some, who might have created have accidentally created their own problem, might not come back on here and fess up. But, much as I hate to admit it, I am here to tell you all, that I actually caused my problem, by not paying close enough attention to my previous work, under the hood. You see, my Swinger had an aluminum radiator installed, with no shroud & no overflow bottle. So, I set out to work on that & I bought an aftermarket overflow bottle & set out to install it. The horns were mounted, in the lower mount position and I needed some room, so I simply moved the horns up to the higher location. And felt good, getting the bottle installed. The problem occurred, when I didn't look close enough, to realize that the wiring runs along the upper part of the radiator mount & I mashed the wires, under the flat washer of the bolt. To accidentally do something like this, was bad enough, but then, I felt I should tell you all, what happened & encourage you all, to be sure to pay close attention, to what you are doing & prevent yourself, from doing something similar. I still can't believe that, with all I have done, over my many years, I could do something like this. SO, I thank you all, for your attempts, to help me & I apologize for my carelessness, in this.