just one more cam selection thread

low compression, stock gears, stock converter and 255/70 tires and you would stick an old school 268 in it, not even the later xe UD Harold better version?
remember
Street only(occasional burnout)
Probably won't go north of 5000 RPM to be honest
there is no longevity bonus from a long ramp universal chevy grind as it does not use all the MOPAR lifter- the mopar may actually be easier depending on the acceleration
Mopar Performance, Engle, Crower, and special order Crane etc all Have Mopar grinds that are not radical
now why
a universal (chevy) master is for the smaller SBC base circle
Mopar has a similar base circle to a BBC
A smaller base circle requires a pointer nose than a larger base circle for the same profile
so which wears better? (and will tolerate more spring pressure if needed)
little pointy nose or round big nose?
No one said it was easy and there are always tradeoffs
but with MOPAR profiles you can have your cake and eat it too
Now some of the faster MOPAR profiles - like some Howard's and the XE-HL series from comp can be a little noisier than Lunati and Bullet has both
The Jones is not Noisy at all
that said do not just order profile from a lobe list
you can't tell how radical or if designed for longevity or for max effort/ regular maintence (although looking at the spring required gives a good clue)