Manual to power steer question
Im not sure what you are referring to with the collapsible feature, i used the below coupler with the borgeson box and had to cut about a inch off my column. I also installed a sealed bearing in the bottom of the column in place of the rubber seal, I found that mode on another thread on the site. Super tight steering with this set up.
Mopar Steering Coupler
Detailed Image
Mopar steering universal joint / vibration reducer in steel. Couples stock Mopar steering columns to Borgeson Mopar power conversion box. Stock column must be cut and shortened for installation. Includes drill bit and roll pins for installation.
Part # 036425
Weight 2.00 lbs
Im not sure what you are referring to with the collapsible feature, i used the below coupler with the borgeson box and had to cut about a inch off my column. I also installed a sealed bearing in the bottom of the column in place of the rubber seal, I found that mode on another thread on the site. Super tight steering with this set up.
Mopar Steering Coupler
Detailed Image
Mopar steering universal joint / vibration reducer in steel. Couples stock Mopar steering columns to Borgeson Mopar power conversion box. Stock column must be cut and shortened for installation. Includes drill bit and roll pins for installation.
Part # 036425
Weight 2.00 lbs
