[WANTED] A BODY PARTS SEARCH

-
Status
Not open for further replies.
oldpunko77

oldpunko77

72 Dusta
FABO Gold Member
Joined
Apr 27, 2015
Messages
1,755
Reaction score
291
Location
Sacramento
Rating - 100%
12   0   0
Contact seller
Several parts here is the list.
1. Driver side #2862553 340 exhuast Manifold either good or bad fixable.
2. 4 speed cross member
3. SB Z bar
4. Exhuast pipes complete or partly.
5. Decent use intake manifold action plus #8007
6. 3 speed linkage rods with levers. That about it for now it all for 72 duster.
 
553 manifold is a 1970. Do you want 1970 manifold pipes? If so I have one NOS & One Walker head pipes and One Walker new passenger side.
I have crossmember as 1972 takes smaller diameter bolts than 1971 & back. I have reconditioned Z-bar. I have 3 speed shifter & rods but not sure Year, if that matters.
Are you going to Carlisle?
Photos upon request
Call/text in CT 8604168434 Joel
 
j061093409 said:
553 manifold is a 1970. Do you want 1970 manifold pipes? If so I have one NOS & One Walker head pipes and One Walker new passenger side.
I have crossmember as 1972 takes smaller diameter bolts than 1971 & back. I have reconditioned Z-bar. I have 3 speed shifter & rods but not sure Year, if that matters.
Are you going to Carlisle?
Photos upon request
Call/text in CT 8604168434 Joel
Click to expand...
Hi joel actually I wish I could there due of distance it pretty far for me but one day I will. So all above yes so either either all different years 68,69, and 70 can be use as far as 3 speed shifter linkages that only need two pieces and levers
 
1970 was the first year of the A-230, so for a floor shift you need 1970 up rods & levers.

The A-230 R-1 rod is the same as an A-body 4-speed 1-2 rod & the A-230 2-3 rod is the same as an A-body 4-speed 3-4 rod. (at least from 1970 up)
 
Alaskan_TA said:
1970 was the first year of the A-230, so for a floor shift you need 1970 up rods & levers. Yep I think you are right.

The A-230 R-1 rod is the same as an A-body 4-speed 1-2 rod & the A-230 2-3 rod is the same as an A-body 4-speed 3-4 rod. (at least from 1970 up)
Click to expand...
 
I have exhaust pipes from manifolds to mufflers that dump in front of the rear axle (I think flowmasters) $100 less than two hours from you.
I also have a matched 340 (1969) exhaust manifolds. $600
 
belmateo said:
I have exhaust pipes from manifolds to mufflers that dump in front of the rear axle (I think flowmasters) $100 less than two hours from you.
I also have a matched 340 (1969) exhaust manifolds. $600
Click to expand...
Cool it works out well with in less 2 hours radius from sacramento so I have one side passenger iron manifold just need driver side.
 
belmateo said:
I have exhaust pipes from manifolds to mufflers that dump in front of the rear axle (I think flowmasters) $100 less than two hours from you.
I also have a matched 340 (1969) exhaust manifolds. $600
Click to expand...
Okay sound good . So where you located?
 
I have the cross member . $75 shipped with mount and factory bolts ready to install. 70 1/2 back take 1/2 inch. 71 and up take 3/8 inch. You will also get the trans mount bolts.

DSCN0202[1].jpg


mounts.jpg


mounts1.jpg
 
Koool I didnt know that as I thought they were all are the same so now I know the difference as you had stated.
 
Status
Not open for further replies.
-

Back
Top