[WANTED] Console brackets A body.....

-
Status
Not open for further replies.
MAPS

MAPS

FABO Gold Member
FABO Gold Member
Joined
Nov 1, 2015
Messages
919
Reaction score
224
Location
Montreal, Canada
Rating - 100%
3   0   0
Contact seller
Well I'm still looking for 4 Speed console brackets for a 69 A body barracuda.....
The car will be out soon so now I'm starting to get desperate lol I'm probably going to have to go with repro ones but I wouldn't mind getting a used set either.....it's not like they will be seen.
Thanks.
MAPS
 
Like you said, they are hidden. You could make some easy with some 1/8 × 2" flat steel.
I have a small break in my garage, but I'm gonna be out of commission for a while, or I would make you some.
 
RRA
I thank you kindly...but I can barely tie my laces..lol
If you can think of anything let me know.
 
The thing about the factory and repop brackets is they are shaped on the ends to fit the tunnel. The tunnel is not centered in the car and the brackets bias to the drivers side. Somewhere here on this site is documentation on where they go.
 
dano said:
The thing about the factory and repop brackets is they are shaped on the ends to fit the tunnel. The tunnel is not centered in the car and the brackets bias to the drivers side. Somewhere here on this site is documentation on where they go.
Click to expand...

This is why I bought a template to be sure.
Thanks for the advice anyhow...
Maps
 
The brackets are the same as the Automatic cars except the auto shifter parts of the bracket. This may help you locate brackets as there are plenty of automatics out there.

console bracket2.JPG


console bracket.JPG


console bracket5.JPG
 
If you do some digging there is a link to a youtube video of a guy measuring the attaching points. It was spot on for me.... I found it using the search engine here...

JW
 
Status
Not open for further replies.
-

Back
Top