Quarter window assembly

I remember the assembly to be in this order
1) if you have nice paint, protect the area around the window frame, I used masking tape.
2) referencing fig 183, the piece shown on top goes in first, it has a roller that goes into a track mounted inside the body frame.
3) fig 183 again, the second large die cast piece goes in next, it picks up a roller from the first piece installed. This piece is held in place by a couple of special bolts that pass through the door frame.
4) the window crank goes in next, a roller goes to each part previously installed.
5) the long track goes in next,
It also picks up rollers.
6) then the window stops get installed

Again, reciting this from memorie, good luck,
I still have the interior out of my 68 so I could get photos to show the finished assembly.
Be careful with the 50 year old plastic rollers, I found the ones that my car was missing from someone parting out a car.