Auto Transmission Shifting Issue Since 4bbl Upgrade

Mr Follmer
When you install the Lokar kits, replace the "L" bracket that goes on the transmission end of the cable, with something more robust, like good thick angle iron. When I installed mine, I found that the flimsy bracket that came with it kept bending, throwing it out of adjustment. I made a thick angle iron "L" bracket, and have not had any problems since.
Also make sure you have the spring, that holds the TV in the forward posistion installed to hold the TV forward. The cable pulls against this spring when giving the engine more gas peddle. Take all the slack out of the wire in the cable housing. Have someone under the car (safely) to hold the lever forward, and then tighten the cable anchor screw, on the carb end. After its installed, and adjusted, check it once in a while as the wire can stretch, then you might have to readajust it., as I said.
Hope this helps Dave