LCA bushings shot

If you haven’t personally replaced the ball joints and tie rods yourself recently, change them out. You have to pull everything apart anyway, you might as well change them now. If you don’t put a ton of miles on the car it may be the last time you have to do it. If you leave them in there and then have to replace them later you have to pull everything apart again and do another alignment.

Moog’s quality has dropped off recently. I would still use the Moog K7103 offset UCA bushings if you have the stock UCA’s only because they’re the only offset bushings for the uppers and the additional caster you can get with those will improve the steering feel and handling. Beyond that I would avoid Moog. Proforged makes pretty much all of those parts, I’ve been happy with the quality of their stuff. I replaced a nearly brand new set of Moog lower ball joints that has a ton of play after only a few thousand miles with a set from Proforged recently and they were better quality.