Inspection of a 904 torqueflite

Sorry....the 1/4” of play is on the reverse drum.....not the forward.

I can move the reverse drum up 1/4”. Maybe the output shaft land is worn. I’ll put the stack of the 904 and the 999 stack and see what’s what. Get a measurement and see why it moves like that

On the 904.....the reverse drum surface area that’s machined sits above the area that’s in machined..

On this 999 the machined surface sits below the in machined.

There are no hot spots anywhere. None of the steels.

The 5 friction have a larger waffle pattern as well. Not the smaller ones like the 904 has