Can 1979 Cordoba/300 spindles be used on older A/B bodies?

DrEamer said

I would think that would drastically change the caster looking at the spindles. That said, I already have the correct ones on my Challenger since it is '73. I was just hoping someone could use the ones from the 300 if I picked them up.



Thanks for the links. The Hot Rod article that I linked looks to have the same table as the ones you linked. Either way, it looks like the 300 spindles would be good for someone to use, and that was what I was wanting to know.

Click to expand...

Swapping the spindles side to side has no effect on the caster. The only thing that changes when you do that is the location of the calipers, either front or rear. All you have to do is make sure the bleeders on the calipers are still at the top.

The only difference between the 73-76 A-body spindle and the 73+ Challenger spindle is the height, as covered in the articles you linked. And yet, the A-bodies had the brakes to the front and the E's had them to the rear. Spindles are swapped side to side between those models, right from the factory.