273 Rockers on a 360
take a sharpie and mark the top of the stem, then cycle your rocker over them with normal spring pressure. youll see the track. it should be more or less centered across the sweep. Yours look like they could be raised a smidge moving the rocker over the stem more. snug, then 1/2 turn on a hydro. May get away with stock 273 pushrods as the adjuster can handle a few hundredths. No help on the pushrod interference 'cept maybe a little grind or get good chro/mo 5/16 rods
take a sharpie and mark the top of the stem, then cycle your rocker over them with normal spring pressure. youll see the track. it should be more or less centered across the sweep. Yours look like they could be raised a smidge moving the rocker over the stem more. snug, then 1/2 turn on a hydro. May get away with stock 273 pushrods as the adjuster can handle a few hundredths. No help on the pushrod interference 'cept maybe a little grind or get good chro/mo 5/16 rods
